Product Features

• High efficiency lanced fin design.
• "No-hassle" 5 year warranty.
• R-22, R410A, AC & Heat Pump compatible.
• All coils have durable packaging with bar coded labels on the box.
• Threaded expansion valves available factory installed or as a field installed kit.
• Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air.
• Piston options include externally accessible body for easy piston change out and/or TXV installation.
• Liquid line refrigerant connections are 3/8" ODF.
• Suction line refrigerant connections are 3/4" ODF (A-Coil 18-36 size models) or 7/8" ODF (A-Coil 42-60 size models & all Horizontal Slab-Coils).
• Suction line refrigerant connections are 1.125" on slab numbers E43, E46, E56, and E65 for size 42 models and higher.
• Copper refrigerant connections for easy brazing on both copper and aluminum slab models.
• Cased coils have heavy gauge embossed galvanized cabinets fully lined with 5/8" foil faced insulation.
• Optional painted cabinets.
• Corrosion resistant coil header plates.
• All A-Coils are upflow or downflow capable.
• All multi-position coils are upflow, downflow, and left or right airflow capable.
• Cabinet insulation hold down tabs for easy drain pan removal.
• Interlocking doors reduce air leakage and allow for easy access.
• Enhanced refrigerant pipe grommets: secure, tight, and easy to install.
• Intertek lab tested 1% or less cabinet air leakage for better efficiency.
• Foam drain seal for reduced air leakage.
• Non-captive refrigerant lines with long stubs make for easy installation.
• All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow.
• Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans.
• UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer.
• Microbana® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.
• HydroTEC low water retention drain pan.
• Expansion valve with improved temperature sensing:1. Mounted inside cabinet to prevent external sweating 2. Bulb clamped standard factory installed 3. Wrapped bulb optional factory installed

WARNING-Face velocity above 350 ' /min. is not recommended for downflow or counterflow applications due to potential water blow-off. 2