Item#: PDH15K5SF

Brand: Friedrich

Free Shipping Sold by: waterheatingsystem.com

New Friedrich PTAC

Quieter performance, improved airflow and higher efficiencies.

New Motor Design
With separate indoor and outdoor motors, the indoor motor can run at slower speeds which reduces sound levels indoors.

New Tangential Blower Wheel
Tangential blower wheel has nearly 5x the surface area of a typical fan used on other PTACs. The result is more uniform airflow over a wider path for faster, more even air distribution throughout the room and improved sound levels.

Air is blown over the entire length of the tangential wheel into the room in a uniform laminar airflow.

3 Speed Fan
Friedrich is the only major PTAC brand with 3 fan speeds in cooling and heating mode.

Soft start/stop fan delay feature reduces transitional noise that is usually associated with compressor start-up.

Universal Heater/Power Cord
All PTAC units ship complete with the standard power cord for that model (7K,9K and 12K = 3.0 kW and 15K = 5.0 kW). If you want to adjust the heater size on any PTAC unit simply unplug the attached power cord and connect the desired size. It is important to ensure that all wiring and building connections are sized properly for the power cord as well.

Universal heater allows installers to change the heat output of the PTAC by changing the power cord, simplifying ordering and installation.

Specifications
Dimensions & Weights
Chassis Width: 42"
Chassis Depth: 13 1/2"
Chassis Height: 16"
PDXWS Wall Sleeve Width: 42"
PDXWS Wall Sleeve Depth: 13 3/4"
PDXWS Wall Sleeve Height: 16"
Front Cover Width: 42"
Front Cover Depth: 7 3/4"
Front Cover Height: 16"
Cutout Width: 42 1/4"
Cutout Height: 16 1/4"
Net Weight: 121 lbs.
Shipping Weight: 141 lbs.
Physical Data
R-410A Charge: 39.86 oz.
Performance Data
Cooling BTUh: 14,500/14,200
Power - Cool: 1,480/1,460 Watts
EER: 9.8/9.7
Reverse Heating BTUh: 13,300/13,000
Power - Heat: 1,300/1,270 Watts
COP: 3.0/3.0
Dehumidification: 3.2 pints/hr
Sensible Heat Ratio: 0.65
Electrical Data
Voltage (1 Phase, 60 Hz): 230/208
Volt Range: 253 - 187
Current: 6.7/7.5 Amps
Reverse Heat Current: 5.8/6.2 Amps
Power Factor: 0.98
Compressor LRA: 36.0
Compressor RLA: 6.5
Fan Motor Horsepower: 0.031
Airflow Data
Indoor CFM - High: 420/390
Indoor CFM - Medium: 410/380
Indoor CFM - Low: 380/350
Vent CFM: 75
Electrical Heat Data
Heater Watts - 230/208: 5,000/4,090
Voltage: 230/208
Heating BTUh - 230/208: 17,060/13,960
Heating Current - 230/208: 21.5/20.5
Minimum Circuit Ampacity - 230/208: 27.2/26.0
Branch Circuit Fuse: 30 Amps