FLEX-MOUNT MULTI-ZONE SYSTEMS:

INDEPENDENTLY WITH ONLY 1 OUTDOOR UNIT

• Choose from 4 different indoor evaporators –

high-wall mount, cassette type, fan coil and

floor ceiling.

• Simple installation.

• All indoor units can be controlled

individually.

• Connect 2 to 5 indoor units depending

on capacity.

• Capacity up 54,000 BTU!

• More than 350+ possible combinations.

IN AMBIENT TEMPERATURE AS LOW AS -13°F

STANDARD FEATURES:

• LOW AMBIENT: Systems are

capable of producing comfort

heating to ambient outdoor

• WIFI: (optional) Control your

indoor unit using your smart phone

mobile device.

• MANUAL SWITCH: Power unit ON/

OFF using manual switch button

located at the evaporator.

• CENTRALIZED CONTROL: Control

up to 64 units using one wired

central control. Front Desk Control

(hotel application) overrides remote

control at the evaporator.

• Display shows error codes based

on system failure.

• Display shows service codes if

you have dirty filters.

• Display will show error code if

leak in the system is detected.

• Display also alerts when unit

goes into auto defrost.

• BYPASS MODE: Unit will continue

to operate if a non-critical

component fails, such as a sensor.

• SELF-DIAGNOSIS: unit will shut

down and go into protection if it

detects abnormalities. The display

will show an error code depending

on the type of protection the unit

is in.

• 2-WAY DRAINING: Option to place

drain hose on left or right hand side

of evaporator makes for flexible

installation design.

• 3 DIRECTIONAL AIRFLOW: Air flow

is directed so that it reaches more

surface area including the corners

of the room being conditioned.

ERROR CODE: Error code is

displayed at the indoor unit if there

is a leak detected in the system.

• MUTE OPERATION: Silence beep

from remote control.

• FOLLOW ME FUNCTION: Remote

control has a sensor built in. In this

mode, the unit will take the

temperature at the remote control

instead of at the evaporator for the

set temperature.